RegisG 0 Posted August 2, 2008 I've been using SBE for about a month without a problem (well, not with the s/w anyways). Last night I went to cut and nothing appeared on the cut screen except small box in lower front corner. I found out that now, I have to "select" the whole image before going to cut screen. Then I get the list of colors to choose what to cut. Is my SBE corruped now or is there some setting that I messed with accidently? Or? Appreciate any help/tips, Regis Share this post Link to post Share on other sites
Jay2703 704 Posted August 2, 2008 In the cut screen there is a check box for "selected only" make sure it isn't checked. Share this post Link to post Share on other sites
RegisG 0 Posted August 2, 2008 In the cut screen there is a check box for "selected only" make sure it isn't checked. No, that's not checked. Thanks Share this post Link to post Share on other sites
RegisG 0 Posted August 3, 2008 Fixed my problem. In cutter setup, I reloaded the default and it corrected problem. Don't know what happened but, glad it's fixed. Share this post Link to post Share on other sites
Jay2703 704 Posted August 3, 2008 Good to hear. I will have to tuck that one away in memory. (too bad it only lasts about 5 minutes) Share this post Link to post Share on other sites
