Guest crshirts Posted July 24, 2008 Weekend project I did. 2 sheets of particle board and a few 2x4s. I use pressure pot (low pressure unit) that requires only 10 to 20lbs of air pressure and 180 grit aluminium oxide. So wood cabinet isn't a problem and cost less than $100 to make I will post plans if anyone is interested. I used saw and straight edge most of cuts. Carl Share this post Link to post Share on other sites
pungohboy 0 Posted July 24, 2008 Nice work. I did some glasses a few years back with a sand blasting cabinet, Made some good $$ on them But I had to hand cut the designs. I have thought about getting a cabinet of my own to play with again. Share this post Link to post Share on other sites
Dakotagrafx 7,297 Posted July 24, 2008 Here are a couple of economical units http://www.homier.com/detail.asp?SessionKey=IN93Elf%2ftyY3MarPT0dyfBSOMES29P%2fdZpY31DgwGAhBvBwJ4Dm%2fq%2b1MZPYQnFyadeJSRQ%2bFyx2B&dpt=9&cat=129&sku=03091 is 79.99 and http://www.homier.com/detail.asp?SessionKey=IN93Elf%2ftyY3MarPT0dyfBSOMES29P%2fdZpY31DgwGAhBvBwJ4Dm%2fq%2b1MZPYQnFyadeJSRQ%2bFyx2B&dpt=9&cat=129&sku=02763 For 149.99 I have the larger unit and it works great but it does come unassembled - when assembling I used sportsmans goop silicone on all joints as these always leak sand!! Share this post Link to post Share on other sites
