BigDog 0 Posted July 18, 2008 How do I get marks on the vinly in order to line up multiple layers of vinyl? Rob Share this post Link to post Share on other sites
JoeCamaro 11 Posted July 18, 2008 Hi BigDog! Welcome aboard! You have to make the registration marks yourself. Open the design and make them. I would suggest you do a serach for registration marks. There are some topics about it. Good luck JC Share this post Link to post Share on other sites
BigDog 0 Posted July 18, 2008 Thanks, I will do that. Thanks for your help. Rob Share this post Link to post Share on other sites
JoeCamaro 11 Posted July 18, 2008 The idea is this: You have a two color decal. Then make 2 squares of one of the colors, then 2 smalers squares of the other color and fit the smaller in the bigger. Share this post Link to post Share on other sites
PBear 5 Posted July 18, 2008 Hay and Hi look under Instructional Contributions and do a search, lots of infor there Good Luck http://forum.uscutter.com/index.php?action=search2 Share this post Link to post Share on other sites
JoeCamaro 11 Posted July 18, 2008 Ok here is an example: I did the blck and red square in the vector program and saved as an eps. Opened in the cutter and cut the 2 colors. The idea is to fit the smaller squares in the bigger squares. When you do that, colors will align perfectly. Joe Share this post Link to post Share on other sites
