Jburns 239 Posted August 27, 2023 Hellooooo everyone!!! It has been a while since I have posted. So I have to following: 1. Embroidery machine 2. Ioline 300 flatbed cutter for cutting twill and fabrics. Operates like any cutter really. 3. Vinyl master, and other software. Here is what I want to do. 1. Embroider ( just like a printer) emblems with sewn crop marks on twill. 2. Move the full sheet to my Ioline 300. Have a prepared cut file with crop marks sent to the cutter. 3. Identify marks manually moving the cutter to each mark, and cutout the emblems. I REALLY don't want to manually cut them out So let me know if you use vinyl master to manually capture crop marks with your cutter. I only have letter version, but happy to upgrade if it can command Manual Crop Mark Detection. Regards, Jason Quote Share this post Link to post Share on other sites