Ed.f 0 Posted November 22, 2020 (edited) I have 4 titan cutters, two titan#1 15"...one titan#2 28"...one titan#3 15". The new titan 3 stops shortly after cutter about 4 words. I checked cables, turned everything off and back on again, reinstalled software. and still having the same problem. The other 3 titan cutters periodically stop in the middle of a job but usually I reboot everything and it cuts ok for quite a while. Has anyone had any success in fixing this problem. I did call tech support but nothing they say seems to work. I have used titan cutter for about 4 years now and I really like them except for this problem. Edited November 22, 2020 by Ed.f forgot to mention I have used titan cutters for years Share this post Link to post Share on other sites
Dakotagrafx 7,297 Posted November 22, 2020 Never heard that, I would suggest they replace it as you don’t have trouble with the cheaper ones . . , as long as you are using the titan3 driver Share this post Link to post Share on other sites