skiinzzz 0 Posted May 11, 2008 Ladies and Gents...what are the limitations with the LaserPoint? I read that it might not be a good idea to cut magnet sheet. I might be ablt to live with that. What about "Shrinky Dinks"? Curious to see what others might have gotten away with... =LJ= Share this post Link to post Share on other sites
Guest Terry Posted May 11, 2008 What are shrinky dinks ? Share this post Link to post Share on other sites
skiinzzz 0 Posted May 11, 2008 I just found out about them myself. They are sold at craft stores. Sheets of plastic (8.5 X 11) that are somewhat similr to x-ray film, but I believe to be thinner. You can print on them from an inkjet printer, cut out the shape(s), toss in the oven, they shrink and become thicker while holding on to infinite detail. I do custom leather and they have become pretty handy to do some pretty neat stuff. Last night I just had an idea using the cutter, but Im not sure what one might get away with, limitations, etc... =LJ= Share this post Link to post Share on other sites
Guest Terry Posted May 11, 2008 I put a exacto blade in a soldering iron and cut mylar film. Share this post Link to post Share on other sites
skiinzzz 0 Posted May 11, 2008 How thick of a material can you cut with a LaserPoint? Share this post Link to post Share on other sites
routesmith 0 Posted May 13, 2008 I never tried cutting them before sorry.. Wayne Share this post Link to post Share on other sites
