MrJoel 72 Posted August 29, 2017 Hey y'all, got a hands on project coming up for a group of guys and gals with Down Syndrome (my little guys both have DS too). Fidget spinners are all the rage at our local advocacy and training center so, hands on wrapping is what we will be doing. I suck at design so any help for the standard 3 sided spinners would help thanks Share this post Link to post Share on other sites
Tenfour86 41 Posted August 31, 2017 Your best bet here is probably to get the spinners you're going to use first, and then take a photo of one next to a scale of known distance so the image can be resized. From there you can make a template for your specific spinner. That way you know for sure it will work. 1 Share this post Link to post Share on other sites
Wildgoose 4,200 Posted August 31, 2017 I have also cut a paper template and then scanned it in. (Also requires having one in hand). I did this for a Wii remote and it worked pretty good. 1 Share this post Link to post Share on other sites
Primal Decals 621 Posted August 31, 2017 On 8/29/2017 at 9:19 AM, MrJoel said: Hey y'all, got a hands on project coming up for a group of guys and gals with Down Syndrome (my little guys both have DS too). Fidget spinners are all the rage at our local advocacy and training center so, hands on wrapping is what we will be doing. I suck at design so any help for the standard 3 sided spinners would help thanks If you can get me a photo of one that your going to use and the measurements i will see what i can do to help, but you will need to do some leg work first. 1 Share this post Link to post Share on other sites
MrJoel 72 Posted August 31, 2017 2 minutes ago, Primal Decals said: If you can get me a photo of one that your going to use and the measurements i will see what i can do to help, but you will need to do some leg work first. I'm going to go ahead and purchase the spinners today. I was playi around with the trace feature in SCAL pro4 and I think I can get it...I'll give ya a Hollar if I get stuck. Thanks Primal for your continuous contributions and offers for help! You rock man Share this post Link to post Share on other sites
Primal Decals 621 Posted August 31, 2017 No problem bud.What you can do is get one and scan it on a printer as color and then you have a image for tracing etc. Or you can scan it as high res and send me the image and i can go from that as starters. You can also try vector magic as well. Which i prefer to use over scalps trace program,I havent taken the time to learn the trace in scalps yet lol... But i really like vector magics outcome a lot. Share this post Link to post Share on other sites
30-284 86 Posted October 8, 2017 Here's one. fidget.svg Share this post Link to post Share on other sites