Yuval73 0 Posted November 14, 2016 Hi. I have the Graphtec Robo Pro for 4 years already and it worked great until recently. Machine is not cutting right anymore, especially small or curved lines. sometimes it does not cut the corners all the way, or on straight lines it do a dotted line instead of a clean straight line. When I cut text with outline it doesn't always do all the outline, or just do the outline in different thickness for different letters, even when in the program it is all the same. I tried everything and really get frustrated. I've changed the blade, the blade holder, the push rolls, the cutting strips. I've played with the force, speed and blade. I've updated the firmware, re-install the driver and nothing help, it seem like it get worse and worse. I'm using the Graphtec ce5000-40 with Corel Draw 6 and Cutting master 2 Any help will be greatly appreciated, hope it's something fixable and i don't need to buy new machine Share this post Link to post Share on other sites
mfatty500 454 Posted November 14, 2016 Welcome to the forum. Is the blade carriage secure on the rail, meaning there is no play in it? It should be tight, while riding on the rail. Share this post Link to post Share on other sites
Yuval73 0 Posted November 14, 2016 Yes, It is secure and pretty tight. Share this post Link to post Share on other sites