Ihatebiscuit 0 Posted August 21, 2016 Trying to get my SC plotter to cut with signlab 9, anyone able to help? It will work with other software. Just can't seem to get it to work with signlab Can't find a plotter setting for the SC 50 inch. Share this post Link to post Share on other sites
slice&dice 2,450 Posted August 21, 2016 Hi, and welcome to USCUTTER forums. The SC, as I recall is made by a company named LiYu, and using that driver should work. Share this post Link to post Share on other sites
Ihatebiscuit 0 Posted August 21, 2016 Slice&Dice, I have the driver for the uscutter and can cut fine if i use a program called "Sign Cut", unfortunatly it is a demo and i would have to pay for it in the future. also it is not a design program so i would have to design in Signlab then export and send to "Sign Cut" just all over a pain in the ass, i am not sure if my settings are wierd or what i am in the process of trying the LiYu. thanks for the help ill keep you posted. biscuit Share this post Link to post Share on other sites
Ihatebiscuit 0 Posted August 26, 2016 No Luck. Still cant get it to work with Signlab 9 I can Design in Signlab but have to export it and open it in another program to get it to cut. a little bit of a pain in the butt. biscuit Share this post Link to post Share on other sites