Alillowr 0 Posted April 12, 2008 The customer wants to have this in all white but the figure will pretty much be blended in with the letters. I am having trouble seperating the martial arts figure in this logo. Can anyone create some sort of outline so that it is seperate from the letters? Or if you have any other suggestions I am open to them. Share this post Link to post Share on other sites
bk2design 1 Posted April 12, 2008 Here is a quick one with the figure seperated sma.eps sma.eps Share this post Link to post Share on other sites
Alillowr 0 Posted April 12, 2008 Thanks for the try but I am looking for something like in this picture for the seperation. The color for the decal will be all white and my goal is to be able to see the figure as a whole still. Thanks though Share this post Link to post Share on other sites
bk2design 1 Posted April 12, 2008 so something like this? sma_v2.eps sma_v2.eps Share this post Link to post Share on other sites
Alillowr 0 Posted April 12, 2008 That might just work, I didnt think about it doing it like that, I guess inside the figure would be blank so whatever surface they put it on would show through.. Cool Share this post Link to post Share on other sites
Guest fivestar Posted April 12, 2008 Or you mean like this? sma again.eps sma again.eps Share this post Link to post Share on other sites
Alillowr 0 Posted April 12, 2008 Ooh thats good too, that is what I was looking for originally, any tips on how this was done? I think that would be a good trick to know Share this post Link to post Share on other sites
Guest fivestar Posted April 12, 2008 I just put a white outline around the swoosh. It's actually not finished after I looked at the eps file. It the swoosh and the M needs welded together. Share this post Link to post Share on other sites
mark-s 1,126 Posted April 12, 2008 If it were me I`d go with fivestars. mark-s Share this post Link to post Share on other sites
