Arcbeat 19 Posted February 19, 2014 Hello Guys, I need some input on this, one of my client order 20 t-shirt and the logo she wants has 3 dif colors. Do you guys have any idea how many layer can you press ? (I m using the SISER VideoFlex Heat Transfer Viny). Thanks. Share this post Link to post Share on other sites
Wildgoose 4,200 Posted February 19, 2014 You can layer it up just fine. If you have a lot of coverage it can start to feel "heavy" or thick but easyweed is thinner than a lot other brands so even layered it works. Post a pic of the design and we can give you a more informed opinion. Share this post Link to post Share on other sites
Arcbeat 19 Posted February 19, 2014 Thanks Wildgoose, I attached the file. logo new resolution.pdf Share this post Link to post Share on other sites
Wildgoose 4,200 Posted February 20, 2014 You won't have any problem with that one at all. There are some gradients in there that you will have to take care of but what little overlaps on that won't even be noticed. Share this post Link to post Share on other sites
Wildgoose 4,200 Posted February 20, 2014 I'm not sure how much you have messed with these things so here is a version without the gradients to worry about. Depending on what cutting program you are using it may have just ignored the gradients anyway but you never know and it would definitely get confused in the cut by color pallet. There were several other little issues with non-welded paths etc that I fixed while I was in there. Welcome to the forum! LNR no gradient.eps Share this post Link to post Share on other sites
Arcbeat 19 Posted February 20, 2014 Thank you , I had to get rid of the gradients before cutting the vinyl. 1 Share this post Link to post Share on other sites