Still need held with a MH871

[Trkn-2 0]

Hello I need help with the install for my cutter MH 871 Iam running win 7-64 on my computer with signblazer and flexi8.5. But I cant seam to get the cutter to be reconized !! Iam using a wireless mouse and I have tried usb and serial connections and nothing as far as connection or setup what am i doing wrong I had the cutter for about a year and a half and just moved and setting it up for the first time.

I am using MH 721 input and usb for output

[mb20music 760]

In Signblazer in the Cutter Setup Menu what cutter do you have selected and also what Output Device

[MZ SKEETER 4,709]

have you worked your way thru all the steps here?

http://start.uscutter.com/

[Trkn-2 0]

have you worked your way thru all the steps here?

http://start.uscutter.com/

I tried everything as layed out and still nothing+used cp2500 with usb002 as setup went step by step

[Trkn-2 0]

In Signblazer in the Cutter Setup Menu what cutter do you have selected and also what Output Device

I have CP2500 as in and usb as output device

[Trkn-2 0]

In Signblazer in the Cutter Setup Menu what cutter do you have selected and also what Output Device

I have CP2500 as in and usb 002 as output device

[Trkn-2 0]

have you worked your way thru all the steps here?

http://start.uscutter.com/

yes and still nothing at the cutter Iam running CP2500 in put and the usb 002 as out put device in the setup

[Trkn-2 0]

have you worked your way thru all the steps here?

http://start.uscutter.com/

yes all each one by one but it doesent seem to do any thing I saved my setup and everything can load onto the cut area and then press cut and receive the tile but when I push on the tile it just sits there and does nothing.

[MZ SKEETER 4,709]

try putting a ticket into USCUTTER, so they can remote your computer.

[Trkn-2 0]

In Signblazer in the Cutter Setup Menu what cutter do you have selected and also what Output Device

I have setup cp2500 input and the usb002 as the output device

[Trkn-2 0]

I have setup cp2500 input and the usb002 as the output device

try putting a ticket into USCUTTER, so they can remote your computer.

I dont understand "Ticket"

[MZ SKEETER 4,709]

this video is exactly what you are looking for. Follow it step by step. It is for a Refine Vinyl cutter

[mb20music 760]

should have "REFINE MH721" and do you have "Blazer.com 6" or "Blazer .com 7" in the output device list or is there any Blazer.com in the list?

[MZ SKEETER 4,709]

I dont understand "Ticket"

support ticket for HELP from USCUTTER

http://support.uscutter.com/index.php?/Tickets/Submit