Mechachu 0 Posted February 11, 2012 Hello. Sorry if this has been posted, I've been looking all night and couldn't find an answer >.< I have the USCutter SC and can't seem to get it going with SignBlazer or anything. The cutter itself installed fine, but I can't figure out which device I'm supposed to use from the list. Basically, at this point, I can't cut and have no idea what to do. Your help is greatly appreciated! Also, I am running Windows 7 x64 and the device is running through USB. Share this post Link to post Share on other sites
mb20music 760 Posted February 11, 2012 Are you asking which USB port to select? Share this post Link to post Share on other sites
Mechachu 0 Posted February 11, 2012 Well sort of. Under Device Manager the cutter is COM5. That wasn't even an option in signblazer for me. I changed it to COM2 under Device Manager and have been choosing that on signblazer. I also don't know which cutter to pick since mine isn't specifically listed. Share this post Link to post Share on other sites
mb20music 760 Posted February 11, 2012 what USB ports does it show in the output device list? try those. Do you have US Cutter Laserpoint listed ? that one may work. Share this post Link to post Share on other sites
mwcarsey 0 Posted February 23, 2012 (you need to download the drivers for it (CH341SER) Share this post Link to post Share on other sites