Newest cutter on at USCutter

[go hodags 0]

Whats the deal with the newest cutter from USCutter.  How does it compare for quality to the rest of them.  It doesn't really say where it lies anywhere?

[Guest fivestar]

Which one are you referring too?

[go hodags 0]

http://cgi.ebay.com/NEW-25-Vinyl-Cutter-Cutting-Plotter-24-w-SignBlazer_W0QQitemZ270206494343QQihZ017QQcategoryZ26245QQtcZphotoQQcmdZViewItem

[Guest fivestar]

That's the refine series....which is the bottom of their line.  I own that same machine and love mine.

[firemalt 10]

From the ebay listing...

Models available from USCutter:

Refine - The is the machine that we started selling three years ago. Over that time it has undergone a number of improvements, and it remains a low-cost workhorse. It uses three pinch rollers because it has no fan to hold the material flat.  It has two material holder rollers which allows you to lay material on the rollers (much better than single roller). Overall, it gets the job done. If you absolutely need a stand and the lowest price, this is the one to get, otherwise, we recommend the PCUT which can be purchased without a stand for about the same price.  This machine is equivalent to the best machines offered by most of our competitors (really), and it includes much better software (important) and outstanding support.  Because we are the volume leader, we are always able to beat all our competitors on price - always!

Creation PCUT - This is a more recent model and it is meant to be a replacement for the Refine line. Overall, it is a heavier, more solidly built machine. It uses much better components such as fine grit material rollers that won't mark your material, a metal carriage with ball-bearing slides, and a powerful fan that keeps the material flat (eliminating the need for additional pinch rollers). It also uses a more modern circuit design and firmware which leads to greater long-term reliability and superior output. The primary advantage of this model is lower noise and higher reliability.

USCutter LaserPoint - The brand new line from USCutter.  This model is based on the Creation PCUT line, but includes a number of updates that we requested after hearing feedback from our customers.  We have included a laser alignment mechnism that is built into the carriage which will allow precision alignment for contour cutting of printed images.  While the contour cutting software is not available yet, it is very close to a beta release and will be provided as a free update to SignBlazer.  In addition, this model has a slightly smaller profile which makes it easier (and safer) to ship.  Finally, all models with stand include a newly design material basket which keeper your material from falling to the floor and getting dirty.  We are able to offer this model at a modest increase in price over our very economical Creation PCUT model.

Copam - Our top-of-the-line series. This machine offers features that are not available on any other cutter at this price point. Our 24" model weighs a massive 67 pounds (compared to 45 pounds for the Refine), and if you observe this model in person, you will see that no compromises were made. This machine is the machine you will want if you are a professional sign maker or if you are using thick material. The stronger motors will power through material like stencil board and sandblast mask. Of course, our top of the line machine is the fastest, quietest, and most accurate of the four, and it absolutely destroys all equivalently priced models such as the higher priced Enduracut Plus from Signwarehouse. This model also has a longer warranty term.

[kenimes 42]

We just got some 60" Copams in the other day. Our top-of-the-line series, and the largest cutter we now offer. I guess that would be the newest.