slopchops 1 Posted January 20, 2008 There is some good stuff here at http://www.clipart-design.com/freeclipart.htm They start in zipped files. I open the zipped files go to say a flame file. Open it and a EPS icon comes up. Thats where I am stumped. I can't open it. They are in EPS files. I have never been able to open this kind of file. The instructions at that web site says use Adobe Illustrator, Share this post Link to post Share on other sites
FBRsportmod68 109 Posted January 21, 2008 what cutting program are you using? In SignBlazer Elements, after you save it, click FILE>IMPORT> then open where you saved it and it should be there to view. thats my explanation ...maybe someone else could do it better Share this post Link to post Share on other sites
Jerry Bonham 1 Posted January 21, 2008 Hello Jerry, That is the link i sent to you on Saturday. Good idea posting it for others. Also i have sent you the following instructions Make up a new folder. Unzip to this folder. In SignBlazer --- FILE>Import Navigate to the subfolders Then click on the EPS file Then click on the OK button Then click on the Use full PostScript Interpreter. Low and behold the file is displayed on screen ready to use. Jerry from SignBlazer., Share this post Link to post Share on other sites
Jerry Bonham 1 Posted January 21, 2008 Hello Jerry, That is the link i sent to you on Saturday. Good idea posting it for others. Also i have sent you the following instructions Make up a new folder. Unzip to this folder. In SignBlazer --- FILE>Import Navigate to the subfolders Then click on the EPS file Then click on the OK button Then click on the Use full PostScript Interpreter. Low and behold the file is displayed on screen ready to use. Jerry from SignBlazer., Share this post Link to post Share on other sites