AshComputers 197 Posted January 22, 2011 Hello all, I had soooo much trouble assembling the stand I revised the instructional image for this. Hope you don't mind guy's from US Cutter. If so just delete it and accept my apologies. Did this in a real rush but might just help someone. Hope this helps someone. Chuck 1 Share this post Link to post Share on other sites
Guest Posted February 8, 2011 I think this is great! Thanks so much - we'll look at replacing the current stand assembly guide that we have online with this one! Share this post Link to post Share on other sites
AshComputers 197 Posted February 9, 2011 Thanks USCutter, I've always tried to help anyone I could. Share this post Link to post Share on other sites
bayotle 26 Posted February 9, 2011 The drawing isn't squared, you should probably consider redoing it from scratch! (looks good! ) Share this post Link to post Share on other sites
AshComputers 197 Posted February 9, 2011 Yeah I know, my heads square though, does that count? heheheeh Share this post Link to post Share on other sites
AshComputers 197 Posted February 9, 2011 lol, ok, thats a little more square. Used my head as a pattern hehhhehe 1 Share this post Link to post Share on other sites
bayotle 26 Posted February 9, 2011 lol, ok, thats a little more square. Used my head as a pattern hehhhehe THAT explains everything..... Share this post Link to post Share on other sites
AshComputers 197 Posted August 18, 2011 I just noticed when I posted this, I didn't say the Pcut as well. Sorry Guy's. Share this post Link to post Share on other sites
slice&dice 2,451 Posted June 10, 2012 (edited) Stand assembly is always a bit of a challenge, figuring out what goes where. Online guides, videos, drawings, threads like this one, all are a valuable contribution. The trick suggested for my SC assembly was to have a magnetic screwdriver, and that was absolutely right. One thing that isn't in this assembly diagram -- How to go about grounding your cutter to the stand. I used a self-tapping screw right into the frame, and believe me, having a cutter grounded is a BIG deal. Edited June 10, 2012 by slice&dice Share this post Link to post Share on other sites