jnbcea 0 Posted January 5, 2011 need help with this. The T disappers when I import into SB. Share this post Link to post Share on other sites
mark-s 1,126 Posted January 6, 2011 Here u go mark-s 1 TITAN TRACE.ai 1 TITAN TRACE.ai Share this post Link to post Share on other sites
jnbcea 0 Posted January 6, 2011 Mark-S, thank you so much! Your are awesome! Share this post Link to post Share on other sites
mars 45 Posted January 6, 2011 For the text try Book Antiqua Bold Italic. -Mike Share this post Link to post Share on other sites
mars 45 Posted January 6, 2011 Just tried importing the .gif into SBE - to trace it you must first convert to B&W. Image:Mode:Monochrome 1 bit When you do that the T does disappear - but just adjust the Threshold level and the T will be picked up for the conversion. Play with the slider - I tried it at 80 (click OK when you like the lvel of detail that is showing up) and then traced it and it comes out nice and clean. You can probably get by without replacing the text - it was good enough to cut without any node editing at all - thanks to the big honking .gif you posted. Good luck and welcome to the forum. -Mike Share this post Link to post Share on other sites
jnbcea 0 Posted January 9, 2011 Thank you Mike for explaining that to me. I have always wondered why some things disappear when I import them. I am going to try the way you suggest and see how it turns out. I need to learn how to do this. Thanks also for the font suggestion also. Share this post Link to post Share on other sites