BandM 0 Posted December 30, 2010 Has anybody pressed vinyl onto a beanie hat? If so could we get the run down of what you used & how you did it. Thanks much. Share this post Link to post Share on other sites
stuart 4 Posted January 2, 2011 hi. we did a few beanie hats a while ago. they are not really suitable garments to use,they tend to go flat where you press and stay flat a bit like fleece. i woulnt bother again we used ultra cut vinyl stu u/k Share this post Link to post Share on other sites
screenprintr 319 Posted January 4, 2011 Embroidery would probably be the best thing to do. You a Solvy back and front with it. If you had to then screen print, but don't think vinyl would last long. Prepress to make sure the fibers are flatened. However I think embroidery would be the way to go with beanie hats. Share this post Link to post Share on other sites
23putts 0 Posted January 12, 2011 Embroidery is the best option. You could press vinyl on a blank patch then sew it on the beanie, but it would be very labor intensive. Share this post Link to post Share on other sites
