Xion DarkRose 0 Posted November 25, 2010 Hello Hello! I just recently got a cutter for my business, and I'm working with sign blazer, interesting program. I have everything set up correctly... or at least I thought I did. Whenever I cut letters and numbers like A, O, R, 0, anything with a center hole it gets skipped over. I've been watching the cutter closely and it doesn't even make an effort to cut those holes out for me, So I've been having to cut them out myself. Any clue as to how this can be addressed? Also I'm having a hard time getting proper measurements as far as height. I never know just how tall my letters will be because 3.00 doesn't come out to be 3 inches. Lastly, what other programs could I use that may be easier for me to understand? Share this post Link to post Share on other sites
Jay2703 704 Posted November 25, 2010 Make sure that the cutouts in the letters are not a different color like white. Otherwise you will have to select both to cut. If you created the text right in SignBlazer you should be able to just cut it without doing anything else. Jay Share this post Link to post Share on other sites