hockeygirl 30 Posted September 30, 2010 When I had my MH721, I used to have to split the file into multiple smaller files and create a box on the lower left corner and have that same box on every file and origin to it each time. So, for example, in your case, I would have the small box, with Sky on the first file. And then the same box in the same location, with High (with the exact spacing left empty for Sky), and so on for each file. And I would set the origin to the beginning of the box, so it'll cut the box, and the rest of the sign in its correct spacing on the vinyl. Where are you located? If all else fails, maybe someone on here can help you out with the cut. I'm guessing you're on the west coast since you're cutting for sky high. Share this post Link to post Share on other sites
bizzytop 1 Posted September 30, 2010 Well do let us know what fixed your problem or how you cut it. Did the static spray help? Or did you have to break it up in smaller chunks? Let us know. Share this post Link to post Share on other sites
bizzytop 1 Posted October 2, 2010 WELL after all the help, no update on what fixed the issue? COME ON..... Share this post Link to post Share on other sites