Plotter Pulling

[dgdave 0]

On my images longer than about 8-9 inches, my plotter pulls the vinyl pretty bad so the cuts aren't lining up. here's all my info

Vinyl cutter model- mh-365

Date purchased (Date is best, otherwise month and year)- 4-18-10 (just replaced the mother board about a week ago)

Connection method (USB, serial, Parallel)- USB, I also have a serial to usb cable, but haven't tried it.

Software (Signcut, Artcut, Flexi, etc)- SignCut

Operating system- Windows XP

Material- 3M 2.5 mil

[Heavy D 1]

Sorry but get used to it or get another cutter.

[rrc1962 0]

If you mean it's not tracking properly, try adjusting the rollers.  I did an 8 foot banner today and tracking was fine. 

[dgdave 0]

What do you mean by tracking? The machine is pulling the vinyl to the right

[dgdave 0]

I tightened up the springs on the rollers and that fixed the issue

[MZ SKEETER 4,709]

great,  glad you got it!!!