CHANGING SPEED IN CUTTER DOESNT SEEM TO WORK

[steelnvinyl 0]

i turn cutter offline to change settings....i want to turn speed of cutter from 70% to 50% and then hit the center button....same one to zero out start location of cutter but it doesnt change.. im using SIGNCUT...Thanks

[Guest Hugo Valencia]

if you are using a laser point you want to press online then mode until it says speed, press the arrows to change it, once done press mode again until it says X 0, Y 0 and then press online again, that should change the speed on the cutter.

also try downloading the manual:

http://support.uscutter.com/index.php?_m=downloads&_a=viewdownload&downloaditemid=42&nav=0

there is also a beginners guide made by one of the members right here:

http://forum.uscutter.com/index.php/topic,17489.0.html

hope that helps!

[steelnvinyl 0]

Thanks i'll try that tonight.

[steelnvinyl 0]

Pretty Much, Yeah.  You go Offline and then hit mode until you see cut speed. Mine only changed with + & - and the you keep hitting mode until you see x+0 and y+0...Thanks a bunch