Daniel_KZK 0 Posted May 12, 2010 Hello! First i had a problem with my usb port, my cutter wouldnt cut but that got fixed after many trials and error. But now when i cut, it oversizes the image by 50%. I dont know what i have done with my settings to get this problem but i cant fix it. How do i get my cutter too cut the requested size again?? Inkscape Signcut X2 Copam 2500 Windows XP Thankxs for any help. I searches this subject but those answers i found couldnt help me. Share this post Link to post Share on other sites
MZ SKEETER 4,709 Posted May 12, 2010 does this help at all? http://support.uscutter.com/index.php?_m=knowledgebase&_a=viewarticle&kbarticleid=54 Share this post Link to post Share on other sites
Daniel_KZK 0 Posted May 12, 2010 Sorry it does not help, i cant make the calibraion cut cus when i press "cut measure square" the plotter just goes off in a straight line beyond the size i put in. My settings are in cm, mm. When i put in 300mm, 30mm or whatever it just goes off in that straight line SLOW and just stops at the end of the paper and starts to "stutter/shake/vibrate" like it wants to go on. Share this post Link to post Share on other sites
Daniel_KZK 0 Posted May 14, 2010 What will happend if i reinstall signcut? do ypu think the problem will be fixed. i still cant do the calibration Share this post Link to post Share on other sites
