Siser easy weed and jpss

[jhelms 5]

OK tshirt people Im printing logo with my 1100 epson with jpss and pressing on shirt and need writing with siser easy weed which do I do first and time for 1st then time for 2nd Thanks jhelms

[TruckDriver 0]

I would do the higher temperature one first.

[Guest fivestar]

I haven't use Easyweed a lot but I know Multicut and Thermoflex can withstand 400 degrees no problem, so I'd press the Easyweed first for about 2 seconds then press the JPSS.

[TruckDriver 0]

I use 3G Jet Opaque and easyweed.  I press the 3G for 30 sec at 350 degrees, then the easyweed for 15 seconds at 302 degrees with no problems.

[Dakotagrafx 7,298]

I use 3G Jet Opaque and easyweed.  I press the 3G for 30 sec at 350 degrees, then the easyweed for 15 seconds at 302 degrees with no problems.

same here - not exposing the easyweed to the higher temp!

[jhelms 5]

outbreak how do you like the 3g jet opaque and thanks all for the info    jhelms

[mr300s 1,272]

I use 3G Jet Opaque and easyweed.  I press the 3G for 30 sec at 350 degrees, then the easyweed for 15 seconds at 302 degrees with no problems.

same here - not exposing the easyweed to the higher temp!

[hockeygirl 30]

Ditto, I always press JPSS first at 375 for 20-25 sec, and then 305 with the siser for 15 sec.

[TruckDriver 0]

outbreak how do you like the 3g jet opaque and thanks all for the info    jhelms

I love it!  It's really great for dark shirts!

Here is a quick review I did on it:

http://forum.uscutter.com/index.php/topic,25726.msg204876.html#msg204876