mwdesigncreate 0 Posted March 6, 2010 -Got my 1st cutter... laserpoint 24" -I put the supplied disk in the computer.... to install the USB Driver. -Opened the "USB Driver" folder... Which file do I double click?... I'm using a Mac computer.... I think all the files might be Windows files. DO I need to download an alternative file or something since I'm using a Mac computer? If so, where do I find it? HELP!!! Any help would be greatly appreciated! Share this post Link to post Share on other sites
MZ SKEETER 4,709 Posted March 6, 2010 maybe this info will help, found it in the Mac board, I don't use it by the way, 1. Buy your cutter. 2. Get your cutter. 3. Get your activation codes and download links for Signcut. One year is included with your purchase, and it's a great way to get up and running fast. It *may be in the box with your cutter, but if not, the support team will get you the info you need. Only took 1 hour for me to get sorted as there wasn't any paper work with my cutter.You need to go to http://www.signcutpro.com/Register-Bundle.html and register your bundle. You will then be shown the download links. You are also sent an email with download instructions. 4. Download and install Signcut. I also installed the Illustrator plugin which allows me to send straight to Signcut from Illustrator. 5. IMPORTANT: Install the USB/Serial extensions. This will allow your mac to send commands to the cutter through USB. Select the right one for your OS. These are available here: http://www.ftdichip.com/Drivers/VCP.htm 6. Connect your Mac to Cutter via included USB cable. 7. Fire up Signcut and open an EPS file. Send to cutter. 8. Enjoy. Hopes this sheds some light on how simple it is to get this cutter working on the mac. Cheers. (HERE IS THIS THREAD) http://forum.uscutter.com/index.php/topic,23825.0.html Share this post Link to post Share on other sites
