Soul Reaper 0 Posted February 23, 2010 OK, So i made a circle with no fill. then i made another circle inside that one, with no fill. Then i drew a picture inside that. It looks good and all, But when i save it to cut in Sign Cut pro only the outer circle shows up. I took the circles and did Object to path for both. then i cut part of the second circle so i could have the logo join the 2nd circle. Now when i open in the S.C. pro it is all red. the logo was done with the pencil tool. what am i doing wrong? any links or info please. here is my file. team logo1.svg team logo1.svg Share this post Link to post Share on other sites
tekcorps 50 Posted February 23, 2010 Something I noticed right off is that the inner circle and your wolf head are not joined paths. That may be you problem. No clue how Sign Cut works. But regardless, you will have a funky split in the cut at the neck and inner circle. I would join those paths and retry. Let us know how you come out. Both neck lines to inner circle are broken. Share this post Link to post Share on other sites
Soul Reaper 0 Posted February 23, 2010 when i unon the two i just get a strait line. no logo. How do you select two different noids on 2 seperate objects to join them? Edit Ok so i figured out that i combined the 2 then touch the 2 noids i want and join selected noids. Also i deleted the outer circle and saved it after i joind the logo and inner circle to gether. opened it in Sign cut and it has no lines? It opens it but shows no pathes to cut. i know i am missing something Edit: I am going to just start all over. maybe that will help. team logo2.svg team logo2.svg Share this post Link to post Share on other sites
tinaski 11 Posted February 27, 2010 when i unon the two i just get a strait line. no logo. How do you select two different noids on 2 seperate objects to join them? Edit Ok so i figured out that i combined the 2 then touch the 2 noids i want and join selected noids. Also i deleted the outer circle and saved it after i joind the logo and inner circle to gether. opened it in Sign cut and it has no lines? It opens it but shows no pathes to cut. i know i am missing something Edit: I am going to just start all over. maybe that will help. i tried it i got it to cut - there was something wrong with the nodes - did you get it to work i can send ya the file it will work for ya - i edited it and then cut it from inkscape so it should work for you too Share this post Link to post Share on other sites
tinaski 11 Posted February 28, 2010 it might need little cleaning up 1234.eps 1234.eps Share this post Link to post Share on other sites