Please Help

[thegregi 0]

I've been trying to convert this logo into a vectorize from a bitmap. Once i get help on how to do that I want to make it a two layer decal. How do i seperate the orange in the E from the blue in the T and send it to my cutter. I also need to have registration marks. These subjects have been covered before on here, but I am very new to this and don't understand anything. Thanks in advance, this is driving me crazy

[prestonservco 26]

Can you tell us what software you need instructions for?

[thegregi 0]

using signblazer elements. also have inkscape

[Jay2703 704]

You will need a bigger image if you want to auto trace this. My recommendation would be to find the font used and re-create the logo. It can be done in Sign Blazer.

Jay

or use the one from Brands of the world:

http://www.brandsoftheworld.com/search/122251026/188960.html

[thegregi 0]

downloaded the logo from brands of the world. Any suggestions what to do next? Any help is greatly appreciated. Thanks

[Jay2703 704]

You should be able to import it to SignBlazer. File + Import. Browse to where you saved it.

[thegregi 0]

no problems importing into signblazer. now I need to make the "T" BLUE and the "E" ORANGE. that is my main problem. I also need to make registration marks. I'm making a full sheet of decals. Thank you very much for your help.

[Jay2703 704]

They should have come in the correct colors.

[thegregi 0]

just came over in all black. i used the cut/mask tool and made it just the outline, still can't get the colors.

[thredz 1]

See if these will work. They are in wire frame, but you don't need the fill to cut. Hope it helps.

tyco11.eps

tyco.ai

tyco11.eps

tyco.ai

[thegregi 0]

ok i finally got the logo to cut, but my lazer point 24" us cutter continues to mess up the design.

  when i send the logo to the cutter it always starts every cut from the left corner. will not cut the logo correctly. any advice