VolleyChick 1 Posted December 21, 2009 Ok, I'm confused...as usual. I wanted to make some window decals of my logo, but I'm not sure how to cut them. I've always gotten them where you put them on the inside of the window facing out. So...I cut it mirrored and weeded it, then thought I'd put the clear tape on it to apply. Is that correct, or do most people put them on the outside of the window? Thanks Di Share this post Link to post Share on other sites
MZ SKEETER 4,709 Posted December 21, 2009 most people put them on the outside of their windows, car, metal, etc. alot of cars are tinted windows and cannot see them when they are on the inside anyway. Just cut like regular and apply, Share this post Link to post Share on other sites
VolleyChick 1 Posted December 21, 2009 Will do - thanks for the speedy reply. Share this post Link to post Share on other sites
MZ SKEETER 4,709 Posted December 21, 2009 not a problem. Share this post Link to post Share on other sites
Jeffrey06 2 Posted December 21, 2009 I put all of mine outside also. Share this post Link to post Share on other sites
Jay2703 704 Posted December 21, 2009 I have seen them done both ways. Like Speedoggy said, they will not show up from the inside on tinted windows but if you live in the colder areas they can get scraped off with the frost if they are put on the outside. On the outside is more common though. Jay Share this post Link to post Share on other sites