splash0321 23 Posted November 25, 2009 just wondering if there is a way to get sign blazer to recognize a "starting point" of each thing that needs to be cut out. I have a very large and intricate design and it seems like when I cut it out my cutter always gets sent somewhere FURTHEST from origin to start the design, or it will cut something and go all the way to the other side of the design to cut something else, then come back to where it just was to cut another object. Because the design is so large, the more the vinyl gets moved, the worse the accuracy. Just wondering if there is a trick to setting up the design to cut things in order. Any ideas? Share this post Link to post Share on other sites
Jay2703 704 Posted November 25, 2009 The best you can do is in the cutter setup window. There is an option there for cutter movement. If you set it to Best Tracking it will start to the left of your design (front of the material) and work to the right (end of the material). You could also turn off the "Cut Holes First" option. Share this post Link to post Share on other sites
