scottboy1973 0 Posted October 21, 2009 I am making a 3 color decal for a customer. I designed it in SBE Blue, yellow, and white. Added reg marks and cut. When I put it together, the white was about 1" to close to the reg marks. The other colors were still in alignment however. I have made sure that the reg marks for each color were precisly on top of one another before cutting. I am thinking of using a 4th color for the reg mark & select it to be cut w/each color. Any ideas? Share this post Link to post Share on other sites
Dakotagrafx 7,297 Posted October 21, 2009 I have done the extra color for registration mark before Share this post Link to post Share on other sites
YadirellT 0 Posted October 21, 2009 That is what I recommend doing too Scott. It's the most basic way to do it. Share this post Link to post Share on other sites
American And Proud 2 Posted October 21, 2009 These were past onto me and i'll pass them on here. Reg Marks for SBE no changing colors needed, they just work as is. Thank prestonservo for these. "Registration marks. Here is one for SignBlazer. Just OPEN, Check Append, Select the file. It will add it to the graphic, and cuts in all colors/layers." Also see this post were he helped me on reg marks.> http://forum.uscutter.com/index.php/topic,22665.0.html rego.SBD rego.SBD Share this post Link to post Share on other sites