importing into winpcsign 07

[yesrno1 6]

The file is supposed to look like the attached image called sb view. Instead it shows up like the pic called winpc view. Does anyone know what I'm doing wrong? The ai file is here also....Thanks

09.AI

09.AI

[mark-s 1,126]

In winpcsign weld it and recolor.

If you check it in wire view it`s all there.

Even if you don`t get it colored the way you want

it`ll still cut fine.

mark-s

[yesrno1 6]

Thanks!

[mark-s 1,126]

mark-s

[yesrno1 6]

can i contour cut in vector mode or only in bitman? i want to put this with a white background or outline, so that it stands out. I couldn't get the contour to come up when i was in vector mode. it said to click on the image and it wouldn't do anything.

[mark-s 1,126]

It`s a vector graphic.(ready to cut)

Put 2 registration marks about 1 in, above the graphic.

Take the backround which should be all one piece of the cross

delete the rest, cut the back round.

Do a go back (red X) the whole graphis should be back.

Click on the back round delete the rest of the graphic is there

cut in different color.

Now u have 2 graphics 2 colors line up the registration marks.

Peel the top layer and lay it down on bottom layer.

OR do an outline of the whole back round of the grahic

and follow the same steps.

Hope this helps.

mark-s

PS u can also go to Signmax.us forum I think they have a video.

[yesrno1 6]

thanks!

[mark-s 1,126]

Yesorno1 did you get it work?

mark-s

[yesrno1 6]

mark-s

this is what I've got so far, when I try to contoure the cross it says to select the image. I click next to it, and on it and it still says the same thing.

maltese cross.eps

maltese cross.eps

[mark-s 1,126]

Here it is back round seperated.

Some times you have to zoom in really close in order to capture certain

parts of a graphic.

mark-s

MALTESE CROSS SERP..ai

MALTESE CROSS SERP..ai

[yesrno1 6]

thanks, will give it a try!

[yesrno1 6]

it worked, I had to use my sign max 24in cutter. For some reason on my refine 1351 just didnt do a good job on the small letters and the details. Thanks

[mark-s 1,126]

Your welcome 

mark-s