jstovson 1 Posted September 21, 2009 Dont know what the problem is - the machine worked just fine on the old computer, but won't work with vista and a usb connection!!! I cleaned it off the old computer b4 I made sure it worked on this one. I know not too bright, and can't put it back on because I used up my last 3 transfers trying to figure this out! Been dealing with this for almost 3 mos, and FINALLY got it to cut in signblazer - but only half of the project! I can't get it to work at all in sign cut. I have a refine 721 thats about 2.5 yrs old. I don't use it much but it worked great. I've checked and rechecked the numbers on the machine and signblazer - they're all the same, 9600 baud, 8 vale, usb com4......... Please Help Share this post Link to post Share on other sites
mikerob2334 2 Posted September 21, 2009 if you're using usb set the baud on cutter and sb to 4800. had the same problem with mine on vista and usb when i first got it, but works fine on 4800 Share this post Link to post Share on other sites
jstovson 1 Posted September 21, 2009 It won't work on 4800 - but I'm wondering if their is a "master size permittiter" somewhere on SB??? If I make it small enough it seems to cut? Or maybe this is just making me crazy.......... Share this post Link to post Share on other sites
Guest HowardI Posted September 21, 2009 Make sure the flow control is set to hardware. Both in the software (Signblazer and/or Signcut) and in the windows device manager. This usually fixes this issue. Howard Irwin Support Specialist US Cutter 425-481-3555 888-298-8143 - Option 2 Share this post Link to post Share on other sites
jstovson 1 Posted September 21, 2009 Think I've got it working. I hope! Thanks for the help. Starla Share this post Link to post Share on other sites