susan 0 Posted October 21, 2007 My plotter is not cutting what I print it is backwards. Can anyone help me. Share this post Link to post Share on other sites
Guest fivestar Posted October 21, 2007 I don't know what program you are using but it sounds like you've got it flipped or mirrored. Look for a flip or mirror button to fix the problem. Share this post Link to post Share on other sites
susan 0 Posted October 21, 2007 using signblazer6 when in cut screen fliped not checked, mirror not checked , but when sent to plotter image is cut backwards of what is on cut screen new plotter from us cutter i think it may be defective Share this post Link to post Share on other sites
go10go4 0 Posted October 21, 2007 Susan, Just wanted to check to see that you noticed that the left portion of the vinyl in SB is actually the front of the vinyl in cutting. This means that y is actually x. In SB the create mode shows the cutter on the right side of the screen. This might be something you've already noticed, but it can be confusing to first-time users. If you want to cut exactly what you see on the screen, you will need to rotate. Share this post Link to post Share on other sites
susan 0 Posted October 21, 2007 I have tried all positions. I'm trying to print an objest length wise and it cuts tile 1 but not tile 2. My object is 15 " wide 31" long. It willl cut one then goes back to home and says waiting but never cuts the 2nd tile. Is there anything else that needs to be done. Share this post Link to post Share on other sites
kenimes 42 Posted October 22, 2007 Which cutter do you have? Share this post Link to post Share on other sites