mceachj1 0 Posted July 20, 2009 New and need help. Using creation pcut plotter. I have a sign which is 22" x 72" for a banner. My vinyl is 24". I laid it out and when I hit the cut button on the sign blazer element software the cutter heads goes from the center to the far left side and stops. What am I doing wrong? thanks Share this post Link to post Share on other sites
MGOMEZ 0 Posted July 20, 2009 turn off your cutter and move the cutter head by hand to the right side off the cutter about 2 or 3 inches from the end. turn on the cutter and press the online button to take it offline, then press the button in the middle of the arrow buttons to set tour home position for the cutter head and press the online button again to bring it back on line. the cutter cuts from left to right.you can also move the cutter head with the arrow buttons after moving it manualy. you can set the cutter head home position where ever you want, depending on what you are doing. hope this helps you. Share this post Link to post Share on other sites
MGOMEZ 0 Posted July 20, 2009 i meant to say the cutter cuts from right to left, sorry. Share this post Link to post Share on other sites
panekbutton 0 Posted July 21, 2009 I'm having the exact same problem so I did what you indicated to do...however it went all the way across the cutter and hit the red button again...any suggestions? I will continue to work on this. Thanks Share this post Link to post Share on other sites
BannerJohn 1,324 Posted July 21, 2009 http://support.uscutter.com or to call in 1-888-298-8143 (use option 2 for support) Share this post Link to post Share on other sites
CRD 9 Posted July 21, 2009 Try with a smaller size sign 10 x 15 cm first with a start from the right handside. paco Share this post Link to post Share on other sites
panekbutton 0 Posted July 21, 2009 I got it to work after changing to a different usb port...even though the one I originally used was the one I set everything up on...technology...that is what keeps me in a job. Share this post Link to post Share on other sites