letteringcreations 0 Posted June 3, 2009 hey i got another question for everyone. When i align the vinyl to get ready to cut, i align it on the thing ur suppose to. then when it starts it slides to the right all the time n doesnt cut straight... Its not bad if i keep cutting letters but when i need to keep the outline then u can really see it. i have 4 holders i tried putting all of them on it loosen one side tightin one side.. ive tried 2 of them on there..i treid putting 2 on the very edge so the vinyl wouldnt move but it sneaks under the roller n keeps rolling. this is being a pain basically doesnt feel like its aligned right. The cutter is from canada a redsail 1360s something like that its a 48" thanks to everyone taking the time to try n help me! Share this post Link to post Share on other sites
MZ SKEETER 4,709 Posted June 3, 2009 are you giving the vinyl in the back slack, so that it is not pulling from a tight roll? Share this post Link to post Share on other sites
letteringcreations 0 Posted June 3, 2009 it is cut off pieces like 20 to 30 inches..u can see within the first 2 inches sometimes she tracks like 1/4 of an inch sometimes.. Share this post Link to post Share on other sites
