jbartwork 1 Posted May 29, 2009 I read one of the posts that had a link to ebay for a usb to serial cable so I got it. I plugged it in, checked the device manager and changed the com in the settings in signblazer. When I try to print it shows it not responding, what else do I have to change to get it to work and how do I change it(I'm just planning ahead so just in case I dont have to ask later and wait for a response to that one too )?, Thanks in advance for any help Share this post Link to post Share on other sites
BannerJohn 1,324 Posted May 29, 2009 not sure what your settings are but flow control needs to be set to 'hardware' for sure. Share this post Link to post Share on other sites
grumpybadger 0 Posted June 6, 2009 Have you loaded the driver for the converter cable? I have attempted to use such a cable in the past for various bits of hardware with varying poor results. I ended up buying a PC with a serial port already built in. Sorry, I know that doesn't help you any though. Share this post Link to post Share on other sites
