Th0m 0 Posted May 2, 2009 I havn;t used my cutter for a long time due to some computer problems. Now I'm trying to remember how it works. I cannot get the size to come out right, even after trying the things i found on the board. I have Pcut with Sign Blazer software. I set the size correction expected 1" and get about 1.4". When i set the size correction to that it works fine for 1", but if i go to 3" it is off again. 3" square cuts about 3.4 Can anyone tell me what I'm overlooking here? Thanks Thom Share this post Link to post Share on other sites
firemalt 10 Posted May 2, 2009 Make sure you turn off the "make proportional" option off when resizing. Share this post Link to post Share on other sites
mars 45 Posted May 2, 2009 Firemalt, Turn off make proportional? I thought that only kept it from becoming taller and skinnier or shorter and fatter compared to the original when you change one dimension. Does it impact the cut size amd make it different from the designed size? Curious-- -Mike Share this post Link to post Share on other sites
firemalt 10 Posted May 2, 2009 Just wanted to make sure it wasn't self-proportioning, which was causing the unwanted size change. Share this post Link to post Share on other sites