cegglestn 0 Posted April 27, 2009 It seems when cutting large jobs like a vector thats say 12X35" it cuts 3/4 of the way than stops. I never had a problem before cutting that size but now its a problem. Its like the machine runs out of memory and the small box in SB that goes with the cut outline stops and the cutter cuts and when it reaches that mark the cutter stops as well. Usually the small box in SB will stop till the cutter catches up and it proceeds but now it just freezes. Is there a setting to automatically clear the memory or a setting that I missed when changing computers?? Thanks Share this post Link to post Share on other sites
Jay2703 704 Posted April 27, 2009 What connection are you using? Share this post Link to post Share on other sites
myvinylvisions 0 Posted April 28, 2009 Im getting the same problem. using the usb. tried it both with my new laptop and on my desktop as neither have 9 pins. I've ordered a 9 pin/usb adapter... crossing my fingers that it helps... any other suggestions about the deleting memory... What connection are you using? Share this post Link to post Share on other sites
Tempted Graphics 0 Posted April 28, 2009 I just ordered a 9 pin serial card to put in my comp and I am eliminating the USB all together that way and hope it helps I will inform when I get it done it it works well Share this post Link to post Share on other sites
Aaron636r 0 Posted November 22, 2009 Im having the same exact problem. Did the serial cable fix the issue? Getting rid of USB Share this post Link to post Share on other sites
Jay2703 704 Posted November 23, 2009 I had similar issues when I first got my cutter. Switched from USB to Serial connection and it fixed it. Jay Share this post Link to post Share on other sites