Guest Schramm Posted April 16, 2009 Hello all, needed some help as I am new to SignCut and normally I do not use registration marks in my work as I am very good at layout but I have a job which is going to require it. It was easy in flexi but I dont even see anything on signcut that directs me to it. Any instruction on this one would be awesome! Rob Share this post Link to post Share on other sites
Kimon 1 Posted April 17, 2009 We would be happy to help, in general reg marks are very easy in Signcut. Access the Registration mark toolbar from the left toolbar by clicking on the registration mark icon. Then With your design loaded in signcut click the settings icon at the top of the screen and define your registration mark size. Now clcik the registration mark icon at the bottom of the page to select either snapping or unsnapping registration marks and then click inside of the display window where you want your registration marks to be placed. Next using the cut by color feature of Signcut toggle colored layers on and of and send each layer to Signcut. You will then have registration marks on each layer for easy lay-up and alignment. You may preview your cut at anytime from the cutout dialog box accessed from the scissors icon on the left side toolbar and then choosing preview. Please see this brief screen video http://screencast.com/t/XitY3lEbbz Share this post Link to post Share on other sites
NatDragon 0 Posted April 28, 2009 LOVE the tutorial regarding registration marks. It looks simple enough for me to try! Thanks! Share this post Link to post Share on other sites
arcticmonster 4 Posted July 24, 2012 Thanks. Will make it easier. Hadn't found that in signcut yet. Share this post Link to post Share on other sites
