kentpyper 0 Posted April 14, 2009 http://www.pyper.com/proline.SBD the above file only prints the words not inside the elongated oval. How do i flatten the image so it cuts all the black lines? Thanks! Kent Share this post Link to post Share on other sites
sailorpatp 0 Posted April 14, 2009 You need to select the white text only then (while holding the shift key) select the black bullet then do a weld /punch through. Then you can delete the white text. proline.SBD proline.SBD Share this post Link to post Share on other sites
kentpyper 0 Posted April 14, 2009 i can only seem to select one letter at a time. when i hold down shift while selecting i can select one letter then the oval gets selected. Share this post Link to post Share on other sites
sailorpatp 0 Posted April 14, 2009 You could punch each letter that way. An EZ way to select groups of objects that are the same color is with the color selecter box. Rightclick on the colors down on the bottom. A little box will come up (The color selector box) Select the white. Drag a box around the letters (it will only select the white objects because the color selector box is just got white checked.) Now........ Select the black in the color selector box while holding down the shift key. Drag a box around everything still holding down the shift key Weld punch through Delete white letters by selecting them the same way again. proline1.SBD proline1.SBD proline1.SBD proline1.SBD Share this post Link to post Share on other sites
kentpyper 0 Posted April 14, 2009 Thank you! That seemed to work. I misunderstood that I had to do a weld command AND THEN a punch command. This also happens alot when i try to cut numbers. The insides of the 8 etc... dont cut. When i look at the wireframe, it looks like its all going to cut only to find out it does not. Thanks again for your help! (oh, i could not delete the white text for some reason but the graphic looks good on the cutting board. Share this post Link to post Share on other sites
pogo 0 Posted April 14, 2009 The easiest solution is to select all of the graphic and pick combine objects from the arrange menu. Share this post Link to post Share on other sites
kentpyper 0 Posted April 14, 2009 that sounds ALOT easier THANK YOU!!! Share this post Link to post Share on other sites
Team Satan 1 Posted April 14, 2009 You need to select the white text only then (while holding the shit key) select the black bullet then do a weld /punch through. Then you can delete the white text. Which one is the shit key? Share this post Link to post Share on other sites
sandman 5 Posted April 14, 2009 You need to select the white text only then (while holding the shit key) select the black bullet then do a weld /punch through. Then you can delete the white text. Which one is the shit key? The brown one right below the AH key. ;D Share this post Link to post Share on other sites
Cre8tiveCutter 7 Posted April 15, 2009 You need to select the white text only then (while holding the shit key) select the black bullet then do a weld /punch through. Then you can delete the white text. Which one is the shit key? The brown one right below the AH key. ;D OHHHHH I'm LAFFIN my (___I___) OFF! too funny! thanx for that! Renee Share this post Link to post Share on other sites