briansdesigns 0 Posted March 23, 2009 when i weed just about always the letters want to come up with it, everytime is this normal or do i have to change something Share this post Link to post Share on other sites
briansdesigns 0 Posted March 23, 2009 ohh and im useing the starter pack vinyl. dont know if thats the problem or not Share this post Link to post Share on other sites
wdcisco 0 Posted March 23, 2009 http://forum.uscutter.com/index.php/topic,15399.0.html Share this post Link to post Share on other sites
john! 1 Posted March 23, 2009 Sounds like the blade pressure (down force) needs to be more. I know sometimes you need to change it lower or higher with different models of vinyl because some are thinner and thicker than others Share this post Link to post Share on other sites
moparmutt 0 Posted March 23, 2009 Be sure to set your blade offset. It sure helped mine. Share this post Link to post Share on other sites
wdcisco 0 Posted March 23, 2009 How do you set blade offset? A link to a tutorial would be nice. Thank you Share this post Link to post Share on other sites
briansdesigns 0 Posted March 25, 2009 how do you do that haha, and my pressure for the blade is to the point where after i cut and flip the vinyl over you can see a dent from the blade not cutting threw but damn close Share this post Link to post Share on other sites
Stoke 0 Posted March 25, 2009 Well, with signblazer, the option to change the offset is in the cutter setup. Share this post Link to post Share on other sites
