JLB 0 Posted March 20, 2009 This is probably a stupid question but I have been struggling with it for more than an hour. I am trying to make my first cut the P-cut CTN-630 and the plot/cut window is so big that I can hit send. I have tried to resize it but have had no luck. Any suggestions would be great. Thanks in advance Share this post Link to post Share on other sites
smee 0 Posted March 21, 2009 G'day there, Yes we had the same problem! Very annoying! If you can change your screen resolution then try that (right click on empty area of desktop and scroll down to properties. Go to settings tab and change resolution there.) We are running XP and we found it wouldn't let us change the resolution, so we hit the advanced button on the settings tab and reduced the DPI to about 72/75. The cut/plot window was now visible but it reduces all the writing on your screen so need to have good eyes. Hey hope that helps!! Oh yeah, it also helps to maximise the cut/plot window. Good luck! Share this post Link to post Share on other sites