Renegade 2 Posted March 15, 2009 I've noticed that sometimes when a graphic is over 12" long (length of vinyl, not width) that my cutter just stops with no error. Often I can take the same graphic and rotate it 90 degrees and then it will be less than 12" and it cuts just fine. Is there a setting I'm missing or do I need more memory or what? Share this post Link to post Share on other sites
Brandon_Davis 1 Posted August 7, 2009 I think I have read posts about this some where else... If this is really an ongoing issue I would love to help troubleshoot and eventually publish our findings... Share this post Link to post Share on other sites
Renegade 2 Posted August 13, 2009 Yep, I figured it out eventually. Its the page length setting that was defaulted to 11" on the cutter. I can't remember what I set it too, but it was something like 1024. Share this post Link to post Share on other sites
mr300s 1,272 Posted August 13, 2009 Yep, I figured it out eventually. Its the page length setting that was defaulted to 11" on the cutter. I can't remember what I set it too, but it was something like 1024. Great info thanks for the update Share this post Link to post Share on other sites