Xmom 0 Posted March 12, 2009 I have a new PCut and am using SB. When I type in text to cut or even import an image, the text looks 'squished' for lack of a better word. As far as the settings, do I need to change something? I think the compression (probably not right word) setting is at 59. XMom Share this post Link to post Share on other sites
pogo 0 Posted March 12, 2009 The compression setting is a percentage of the width of the copy. It should normally be set at 100%. Share this post Link to post Share on other sites
Xmom 0 Posted March 12, 2009 Thanks. I hadn't messed with it and each time I log into SB, it comes up as .59 so I changed it. XMom Share this post Link to post Share on other sites
CyberChuck 4 Posted March 15, 2009 I have seen times when the text looks "off" on my images as well. But when I cut them, they come out fine. Seems to be a problem with the WYSIWYG rendering screen. Charlie Share this post Link to post Share on other sites
cutme 5 Posted March 15, 2009 try calibrating the cutter and software by doing this... http://forum.uscutter.com/index.php/topic,11751.0.html if that does not work, then you may have too much slack in the feed roller drive belt. bb Share this post Link to post Share on other sites