angelodvl 0 Posted February 5, 2009 I just recieved my sample from US Cutters, but it did not bring any instructions. At what setting am I supposed to have it on and for how long do I press for? Thanks Share this post Link to post Share on other sites
CyberSultan 6 Posted February 5, 2009 302F at 10-15 seconds. Share this post Link to post Share on other sites
Jaymsimon 1 Posted February 5, 2009 This could be diff per press but I set to 345 for 20sec and works like a charm.. But I have seen where they say 300 for 5-10 sec you will just have to play with it per material you are using. jay Share this post Link to post Share on other sites
angelodvl 0 Posted February 5, 2009 I usually use 100% cotton AAA T-shirts. My heat press goes by celsius (I learned the hard way ) Share this post Link to post Share on other sites
CyberSultan 6 Posted February 5, 2009 So that would be 150C then at 10-15 seconds (that is what I use and according to the instructions that are sent along with Siser Easyweed). Share this post Link to post Share on other sites
mustangconv85 0 Posted February 5, 2009 This could be diff per press but I set to 345 for 20sec and works like a charm.. But I have seen where they say 300 for 5-10 sec you will just have to play with it per material you are using. jay those are the directions that come with Thermoflex plus Siser is 302f for 10-15 sec Share this post Link to post Share on other sites
firemalt 10 Posted February 5, 2009 My heat press goes by celsius (I learned the hard way ) For future refference... http://forum.uscutter.com/index.php/topic,11695.0.html Share this post Link to post Share on other sites