Ursine 0 Posted January 25, 2009 I did a window graphic on my truck about 3 weeks ago. Now I see air bubbles that weren't there at the time of application. I've heard of small bubbles disappearing over time but not the other way around. I'm using GF(General Formulations) 3 mil white. Dave Share this post Link to post Share on other sites
2GuysSign 4 Posted January 27, 2009 Usually i get some bubbles in my Oracal and about a week in 70+ Degree Weather with constant sun, they go away... if not just use a fine point needle and just poke so the liquid or air comes out. the hole will disappear in time! Share this post Link to post Share on other sites
firemalt 10 Posted January 27, 2009 Usually i get some bubbles in my Oracal and about a week in 70+ Degree Weather with constant sun, they go away... if not just use a fine point needle and just poke so the liquid or air comes out. the hole will disappear in time! just to add to this... pike the bubble at a 90 degree angle to your substrate. Share this post Link to post Share on other sites
