bjbk 0 Posted January 20, 2009 this is my first big cut, im going to be doing a two color sign, lettering with shadow; its gonna be about 15" by 60". what would be the easiest way to overlay the two colors together using registration marks never done this before so any help would help thanks, Brian Share this post Link to post Share on other sites
Spyder Graphix 0 Posted January 21, 2009 I never have used registration marks on two layer. I just do a wet app and bada bing i am done.. Share this post Link to post Share on other sites
CyberSultan 6 Posted January 21, 2009 I agree with Spyder on doing a wet app. Very easy to position something of that size and you get a finished result without bubbles. Share this post Link to post Share on other sites
azdecals 3 Posted January 23, 2009 I'm pretty new so take this with a grain of salt. The couple of two colors I did, i put down the reg marks, then taped down the top hinge. Because the graphic was large I also taped down the left hinge. then cut it in half (okay not half but I had two parts) Then layed them down one at a time. If I was going to try something like your talking about I might put reg marks on either end. Tape down both ends, and cut it in half. Lay down one half at a time. When I cut it in half I'd pick a spot between letters obviously). It will talk longer, but i'm a bit cautious. azdecals Share this post Link to post Share on other sites
MonkeyMeMe 8 Posted January 24, 2009 What are you using for wet application? thanks MMM Share this post Link to post Share on other sites