rca90gsx 0 Posted January 8, 2009 I'm a complete newbie to vinyl cutters! I got a mini p cut with the signblazer software for christmas to make vinyl paint masks for slot cars!! I'm really excited, as I've completed my first couple of drawings and attempted cutting them this morning... The sizing is correct, it cut everything out perfect, except for one minor detail... as the cutter went back and forth/side to side to start and finish the cuts, it zig zagged back and forth across the mask cutting those lines as well.... Any ideas where i've gone wrong? I appreciate it greatly!!! Share this post Link to post Share on other sites
rca90gsx 0 Posted January 8, 2009 I've searched the posts and i'm going to try and adjust the cutter blade height first and pray that fixes the problem. Share this post Link to post Share on other sites
Rhino 0 Posted January 8, 2009 Welcome yes check blade depth Share this post Link to post Share on other sites
bayshorecreations 30 Posted January 8, 2009 Welcome to the board! I agree Blade depth. Share this post Link to post Share on other sites
2GuysSign 4 Posted January 8, 2009 Welcome to USCutter from Jersey! Share this post Link to post Share on other sites
