Search the Community

Sorry in advance if this has been covered, I could not find anything so I picked up a Vevor 720 machine, it was cheap but did not have anything with it other then the usb and power cable, the seller said he got it in what sounded like a storage locker sale or something I have signblazer currently on my laptop , I connected the usb but could not reach the cutter. I didn’t think it would be that easy anyway so, is there a driver available for this cutter is there a link somewhere for sign master software or Is there a way I can connect my current signblazer to it thanks

BONJOUR, j'ai un traceur vevor et le logiciel signmaster. depuis hier, j'ai un message d'erreur sur mon écran error right, mon plotter tape a droite et il se met en défaut. pouvez vous m'aider svp Merci d'avance [HELLO, i have a vevor plotter and the signmaster software. since yesterday, I have an error message on my screen error right, my plotter taps to the right and it goes into default. Can you help me please thank you in advance]

*UPDATE* Sorry, just realized I think I posted this in the wrong forum.... my cutter isn't MH series.. Recently bought a Vevor KI-870A with the intention to mainly cut htv. When I try and cut vinyl or plot with pen, the corners don't register properly and I get the issue seen in the image attached. Would love a solution please! TIA..

Hello, A couple of months ago I purchased this new Vevor KI-720 cutter, which came with Signmaster software and USB cable. Out of the box and everything connected the feed rollers did not rotate, while the display was showing that they should. It wasn't able to feed vinyl. What I did was opening the cutter to find the motor that drives the feed rollers, to measure if there was any power getting to it. When I opened the bottomplate, I saw that the entire power supply was loose inside the cutter, while it should be bolted down to the bottomplate. This might have happened during shipping from China to me. Because the power supply was loose it must have bumped the connector to the feed roller motor, because that connector was loose and some pins of the motor were bent. Easy fix: straightened the pins, connected the connector, bolted the power supply down to the bottom plate and it functioned. I also had minor problems with getting the Signmaster software to recognize the plotter, as I was not able to select any plotter in a drop down menu. I contacted Future software, opened a ticket, and they helped fixing the issue within a day or 2. I had to download and install new Signmaster software and after that it worked and I was able to send designs to the cutter. ^Power supply loose inside of cutter. Also connector of feed rollers motor came off. ^New Vevor vinyl cutter. ^Sending design to vinyl cutter with signmaster software. ^Little bit of customization... 20210419_213954.mp4

hello all. I am in need of some pinch roller assembly for my vevor SK-870. I have purchased what I thought was the correct rollers, but they do not fit on the back. The gap is too small to go over the rail in the back of the cutter. Does USCutter make a roller compatible to the Vevor SK-870? If so I would love to purchase a couple of them for my machine.

I am looking for an extra blade holder for this cutter, Anyone know if it is the same as another cutter, parts wise ? Had my cutter for a month now , and having fun with it.

HELP! I HAVE A VEVOR SK 870 THAT SUDDENLY STOPPED ROLLING THE VINYL AND JUST WANTS TO CUT OVER ITSELF................IDEAS?!?!

A while back, I helped a friend to set up a cutting studio of their own. The machine we went with is a Vevor 34" and since I'm just sitting around here with a few minutes of free time (aren't we all?!!) I figured it might be interesting to make a post that relates our experiences with that unit. Let's start with the original advertisment of the cutter --- it shows a configuration of grit rollers similar to the LP3 and Titan models. In other words, there are specific locations of the rollers, at spaced intervals across the lower plate. That arrangement is clearly visible in the pictures accompanying the eBay listing. (This type of setup helps to improve long-length tracking of the vinyl). The actual cutter that arrived has grit rollers all across the machine, similar to the MH and SC2. OK, next --- The LED illumination. This is an impressive blue light that has a separate on-off switch, if you don't want the light lit. The advertisement didn't show this feature in the photos and it came as a surprise (in fact, I didn't know there was such a light, until I wondered about a little button on the back and pressed it). Another thing was the media basket, included with the stand. Now, when you look at the picture, the first thing you realize is the vinyl holder (2 steel rollers) is mounted to the front. We did not assemble the stand like that, and put the rollers to the rear, as I'm used to. Onwards --- getting our first cuts. I did not install the supplied SignMaster (a version of VinylMaster) at first, and opted to just go with SignBlazer, figuring I could get this thing running with that. Well, it did operate (RedSail driver) but the cuts were off, leaving distinct 'tabs' on the circles (end of cut on circles not coming to the same point as the beginning point. Using other drivers (Roland, LiYu, Copam) produced the same results. I messed around with the overcut and offset settings, but couldn't get it right. So, SignMaster was implemented with the machine-specific driver that is included (There's a big yellow sticker right on the front of the unit that says use the D870 model when installing the software). Yeah, that resolved the problem, and the cuts were fine using it. Of course, that meant my friend had to re-learn the design software (she had been familiar with the workings of SBE and liked it). As a workaround for her, I showed how to do designs in SBE, export as .eps and Import to the S-M program for cutting. A bit cumbersome with a few extra mouse clicks and keyboard keystrokes, and she's getting used to SignMaster as she goes along. What else? The cutter is quieter than the SC2 I own. Still, it's a stepper motor, and as such, produces a bit of 'chatter' as it goes around. Overall, for $320 (including 'fast&free' shipping) this Chinese cutter serves the purpose (and is already paid for itself several times over). In my humble opinion, the US Cutter LP3 34" at $650 is a superior value overall. But, I guess that's comparing apples to oranges. Thanks for listening. Stay safe, stay home, and stay busy!

Hello. I recently got VEVOR 53 cutter. It came with ArtCut 6 cutting software. This software is very complicated and got lot of stuff I don't need in cutter software. I want to switch to Sign Cut Pro 2. Does any one knows how to set up this cutter with this software? And is it possible after-all? Maybe someone can suggest software that is kinda similar to Sign Cut and work with my cutter. Thank you for help in advance.

is there any software out there compatible with a vevor VV375 cutter. artcut came with it and i cant even use the images that came with disk. also the image tracing is sub par. the machine cuts well just cant find anything that will play with it..HElp!