ryugaiden05

Yea I just replaced the carriage and it is still doing the same thing. Also I found that it is not connecting to the computer. So I am leaning towards the main board a well. Going to call tech support tomorrow.

Yea I found this one. https://www.uscutter.com/USCutter-TITAN-2-Replacement-Carriage?utm_source=google&utm_medium=cpc&utm_campaign=PLA&gclid=CjwKCAjw4ZTqBRBZEiwAHHxpfq0haPkgHeYJoN2m4CuiIOd0F9Arwyk4JI-hUO_vjvhCkQlImqa4xxoCJBUQAvD_BwE

I have a Titan2 cutter that I have not had any problems with for about 2 years. However the other night we had an electrical storm and I think it may have messed up the carriage on the cutter. After cutting the cutter on the blade holder drops all the way down and will not raise back up. The carriage will move side to side by the arrows on the cutter, but it actually is pulling up the cut strip when it moves. Is there a reset somewhere for this or do I need to order a new carriage? I have orders waiting to be filled and everyday I am down is costing me money.

Thanks I will take a look into this.

Hello everyone. I hope that someone here can help point me in the right direction. I have been doing vinyl for about a year and have now been asked if I can do a sign for a local business. I have been trying to find what would be the best option use while also keeping the cost down for myself and the customer. I am thinking we are not going to go any bigger the a 2ft x 4ft or 4ft x 6ft sign. I am thinking aluminum would be my better bet, but not completely sure. This is going to be out on the edge of the road to advertise for their business. I am looking at probably doing a white sign with black lettering and graphics.